Blog

Capacitive humidity sensing properties of freestanding bendable porous SiO2/Si thin films | Scientific Reports

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Scientific Reports volume  12, Article number: 11689 (2022 ) Cite this article Pva Water Transfer Film

Capacitive humidity sensing properties of freestanding bendable porous SiO2/Si thin films | Scientific Reports

The fabrication of freestanding bendable films without polymer substrates is demonstrated as a capacitive humidity-sensing material. The bendable and porous SiO2/Si films are simply prepared by electrochemical-assisted stripping, metal-assisted chemical etching, followed by oxidation procedures. The capacitive humidity-sensing properties of the fabricated porous SiO2/Si film are characterized as a function of the relative humidity and frequency. The remarkable sensing performance is demonstrated in the wide RH range from 13.8 to 79.0%. The sensing behavior of the porous SiO2/Si film is studied by electrochemical impedance spectroscopy analysis. Additionally, the reliability of the porous SiO2/Si sensing material is confirmed by cyclic and long-term sensing tests.

The demands of sensing materials capable of detecting external stimuli and changes are dramatically increasing with the advancement of smart electronic devices in various applications. Especially, bendable, flexible, and stretchable functional sensing materials have been intensively developed by the rapidly growing demand for skin-inspired wearable devices1,2,3. The development of various wearable electronic skin (e-skin) sensors has been required for artificial skins for humans or robots and for individual health monitoring. The human-interactive wearable e-skin devices with skin-like functions that recognize tactile, temperature, and humidity information can be realized with the development of versatile flexible sensors. Artificial tactile systems, equipped with flexible pressure and strain sensors for e-skin devices, have been intensively reported. The research on e-skin devices, including flexible humidity sensors, has focused on their promising role in physiological health monitoring. Most of the reported humidity sensors for e-skin devices have been structures composed of sensing materials on flexible polymer substrates. Polymer substrates, such as polydimethylsiloxane (PDMS), polyethylene terephthalate (PET), and polyimide (PI), have been utilized as flexible supporters, with good mechanical properties, in humidity sensors4,5,6,7,8,9. Huayang et al. developed an e-skin compatible humidity sensor with a two-dimensional WS2 film on a flexible PDMS substrate4. Shinya et al. fabricated a fast-response and flexible nanocrystal-based humidity sensor on a PI substrate9. Additionally, natural polymers, such as silk fabrics, leathers, and papers, have been employed to enhance biocompatibility, elasticity, and flexibility as substrates of e-skin humidity sensors10,11,12,13. So far, most sensors reported as freestanding flexible humidity sensing materials have been fabricated on flexible substrates or by composite-type sensing materials with flexible materials. Flexible humidity sensors with only freestanding sensing materials, excluding elastic substrates such as polymers, silk fabrics, and papers, have been rarely reported. Xiayu et al. fabricated freestanding dried foam films of graphene oxide for humidity sensing14. Qingshen et al. reported a stretchable humidity sensor employing a Ag-PI mixture on PI as a freestanding sensing material15. However, the fabrication of flexible and wearable sensors with pure freestanding sensing materials without the aid of flexible polymer substrates is still a challenging issue.

In our previous works, the fabrication of electrochemically exfoliated flexible single crystalline Si films was reported16,17. In this paper, based on the previous results for flexible Si films, bendable SiO2/Si films for a capacitive humidity sensing device were investigated. The porous SiO2/Si film was utilized in a capacitive humidity sensing device. Since hydrophilic porous SiO2/layer with high surface area is suitable for the adsorption of water molecules, the SiO2 dielectric layer can sensitively detect the humidity levels as a dielectric sensing material for the capacitive sensor. The Si layer was employed as the supporting substrate of the bendable SiO2/Si film including the brittle SiO2 dielectric layer. The bendable freestanding SiO2/Si films, without any flexible substrates, were fabricated by an electrochemical-assisted stripping process of single crystalline Si following by thermal oxidation. Additionally, the surface morphology and thicknesses of the porous SiO2 films were controlled by the metal-assisted chemical etching conditions and oxidation time. The capacitive humidity sensing properties of the fabricated freestanding bendable porous SiO2/Si films were characterized as a function of relative humidity (RH) and frequency. The sensing behaviors of the porous SiO2/Si films were investigated with electrochemical impedance spectroscopy (EIS).

The increasing demand for various flexible electronic devices has encouraged the development of flexible electronic materials. The fabrication of flexible metal oxides, without the aid of polymer substrates, as support structures is still a challenging issue. The fabrication of bendable freestanding SiO2/Si films has been demonstrated for a capacitive humidity sensing device. Figure 1 is a schematic illustration of the fabrication procedures for a bendable SiO2/Si humidity sensor. First, a Ni/Ti adhesive layer was deposited on a bare Si wafer using an e-beam evaporator. An additional Ni layer was electrodeposited on the e-beam evaporated Ni/Ti adhesive layer. The thin Si layer, with the deposited Ni/Ti layers, was exfoliated by the high tensile stress that was induced in the electrochemical deposition process of the Ni layer. The freestanding flexible single crystalline Si thin film was fabricated by the removal of the deposited Ni/Ti layers on the exfoliated Si layer using chemical etchants. The porous structure of the surface of the exfoliated flexible Si film was formed by a metal-assisted chemical etching process18. The surface of the Si film, including the porous Si layer, was oxidized by a thermal oxidation process, resulting in the fabrication of the porous SiO2/Si thin film as a freestanding bendable structure. Au/Ti layers on both the top and bottom sides of the SiO2/Si film were deposited by an e-beam evaporator as electrodes for a humidity-sensing device.

A schematic illustration of the fabrication of a freestanding bendable porous SiO2/Si film.

The flexible Si thin films prior to the fabrication of the porous SiO2/Si thin film were prepared by the exfoliation of the Si wafer due to the tensile stress of the electrodeposited Ni layer. Figure 2a illustrates the thicknesses of the exfoliated Si films as a function of the applied current density to electrodeposit the Ni layers. The thicknesses of the exfoliated layers linearly decreased with the increase in the applied current density for the electrodeposition. The thickness was reduced from approximately 88 μm to 48 μm, as the applied current density was increased from 10 to 50 mAcm−2. The previous works have shown that the internal stress of the electrodeposited Ni films increased with the increase in the applied current density17. The enhanced film stress was attributed to the increase of the over-potential, the rate of nucleation, and the rate of hydrogen evolution. The enhanced strength of the applied tensile stress decreased the thickness of the spalled Si thin film. The initial spalling time for crack propagation from the edge of the bulk Si wafer might be decreased with an increase in the internal stress intensity of the electrodeposited Ni layer. Therefore, the thickness of the exfoliated Si thin film was reduced by the reduced initial spalling time of the Si thin film. The exfoliated freestanding Si thin film, with well-controlled thickness, can have flexibility, as shown in Fig. 2b.

(a) The thickness of the exfoliated Si layer as a function of the applied current density in the electrochemical-assisted stripping process, (b) the image of exfoliated flexible silicon layer.

The porous structure on the surface of the flexible Si thin film was formed by a metal-assisted chemical etching process18. The selective etching of Si was performed at the interface between Si and noble metals. The noble metals act as catalytic cathodes for hole injection in order to accelerate the etching of Si in a HF etchant. Therefore, the morphology of the porous Si structure can be determined by the distribution, size, and shape of noble metals on the Si. Ag nanoparticles were deposited on a Si thin film as the metal catalysts for a Si etching process, as described in Fig. 3a. The good distribution of Ag nanoparticles on the Si thin film was achieved by the controllable nucleation from tin sensitization19. Sn2+ ions immobilized on the Si thin film can be utilized as nucleation sites for Ag nanoparticles and as reducing agents for the Ag electroless plating. Figure 3b shows the top-view and cross-sectional view (inset) of the porous Si on the Si film prepared by the Ag-assisted chemical etching process. The porous Si layer was etched for 6 h had a thickness of approximately 2.3 μm. The morphologies and the thicknesses of the porous Si layers as a function of the metal-assisted chemical etching times are described in Fig. S1. The thickness of the porous Si layers linearly increased with an increase in the etching time from 30 min to 6 h.

(a) SEM image of the electroless deposited Ag nanoparticles on the exfoliated flexible Si film, (b) SEM image of the porous Si surface formed by an Ag-assisted chemical etching process (inset: cross-sectional view of the porous Si surface).

For the fabrication of freestanding bendable SiO2/Si films as capacitive humidity sensors, the Si thin film, including the porous Si layer, was annealed at 1000 °C for 6 h in the air gas including 21% O2. Figure 4a shows the morphology of the oxidized SiO2 on the surface of the bendable SiO2/Si film. The oxidized SiO2 layer was formed at the surface of the porous Si structures. The thickness of the SiO2 layers on the fabricated Si thin film, with a porous surface, can be assumed by the thicknesses of SiO2 layers oxidized in bare Si wafers under the same condition at 1000 °C in air. The thicknesses of the SiO2 layers formed on Si wafers as a function of annealing time were measured by an ellipsometer, as described in Fig. S2. The SiO2 layer formed in the porous Si structure might be expected to be thicker than the thickness of 145.6 nm in the SiO2 layer oxidized on a bare Si wafer for 6 h, due to the increased surface area for the oxidation. The cross section of the SiO2/Si film was analyzed by high-resolution TEM (HRTEM), as shown in Fig. 4b. The interface of the two layers, consisting of SiO2 in the amorphous phase and Si in the single crystalline phase, was clearly distinguished in the HRTEM image. The Si layer prepared by the exfoliation of a single crystal Si (1 0 0) wafer clearly maintained the well-oriented lattices. The HRTEM image of the oxidized SiO2 layers unable to observe any structure in the amorphous phase. Additionally, the amorphous SiO2 structure and the single crystal Si structure were confirmed with the fast Fourier transform converted from selected area electron diffraction patterns (FFT SAED), as shown in the insets (i and ii) of Fig. 4b, respectively. The image of a freestanding bendable SiO2/Si film including a metal oxide layer is shown in Fig. 4c.

(a) SEM image of the porous SiO2 surface on a bendable SiO2/Si film, (b) HRTEM image of the interface of the SiO2/Si film (insets: FFT SAED patterns of the SiO2 part (i) and Si part (ii)), and (c) the image of the freestanding bendable porous SiO2/Si film.

The capacitive humidity sensing performance of the fabricated porous SiO2/Si film was characterized by controlling the frequency and RH. To measuring the variation of the capacitance of the SiO2/Si film, Cu wires were connected with Au electrodes and were deposited on the top and bottom sides of the fabricated SiO2/Si film. The variation of the capacitance between the top and bottom of electrodes was measured to characterize the humidity sensing properties. The SiO2/Si film was transferred to a humidity sensing chamber. Figure 5 is a schematic illustration of the humidity sensing environment. The humidity of the chamber was controlled by changing the ratio of dry gas to wet gas. The capacitance of the porous SiO2/Si sensing material with leak conduction can be described by Eq. (1), where C0, εr, γ, ω, and ε0 are the capacitance, and relative dielectric constant of and ideal capacitor, conductance, angular frequency, and permittivity of free space, respectively20. The capacitance of the sensing materials is proportional to the reciprocal of the angular frequency, 1/ω, and the conductance, γ. The sensitivity for the humidity sensing response was calculated by the following Eq. (2), where CRH and Cdry were the capacitance under the varied RH and the capacitance of the lowest RH of 1.63%, respectively. Figure 6a shows the sensitivity of the fabricated porous SiO2/Si film as a function of frequency and RH. The frequency was varied as 100 kHz, 500 kHz, and 1 MHz, and the RH ranged from 13.8 to 79.0%. As described in Eq. (1), the increase in the applied frequency shows a reduced sensitivity in the range of high RH. No sensing properties were demonstrated for frequencies higher than 1 MHz. The adsorbed water molecules on the sensing material under high frequencies, with a quickly changing electrical field, have insensitive polarization and a reduced dielectric constant21. The humidity sensitivity of the porous SiO2/Si film linearly increases with an increase in RH. The variation of capacities for the humidity sensing response in the porous SiO2/Si film is attributed to the varied conductance from water molecules adsorbed on the surface of porous SiO2. Therefore, the enhanced sensitivity in high RH conditions can be explained by the increased polarization of the adsorbed water molecules on the surface of the porous SiO2 in the electrical field.

A schematic illustration of the humidity sensing environment.

(a) Humidity sensing properties as a function of RH at the frequencies of 100 k, 500 k, and 1 MHz, (b) hysteresis characteristics for the adsorption and desorption at a frequency of 100 kHz, (c) a single sensing curve at 100 kHz in 71.4% RH, and (d) Nyquist plots for the RH levels of 1.8%, 53.4% and 84.5% (inset: the equivalent circuit model of the porous SiO2/Si film).

Figure 6b shows the hysteresis characteristics for the capacitive humidity sensing response of the fabricated porous SiO2/Si film. The solid square line and solid circle line in Fig. 6b stand for the adsorption of water with increasing RH and for desorption with decreasing RH, respectively. The hysteresis properties were calculated using Eq. (3), where He, ∆Hmax, and FFS are the hysteresis error, a maximum difference of sensitivity between adsorption and desorption at the same RH, and a full-scale output (Sensitivityat 13.8% − Sensitivityat 78.4%)22,23. The hysteresis error is 5.0% for a RH of 50.1%. The humidity sensitivity after bending test of 5 times was shown in Fig. S3. After the bending test, the sensitivity and linearity were changed to 392% at a RH of 79% and 0.989, respectively.

A single sensing curve at 100 kHz at a RH of 71.4% is shown in Fig. 6c. The response time and recovery time for humidity sensing, defined as the time to reach 90% of the total variation, were 18 s and 30 s, respectively.

The capacitive humidity sensing performance can be determined by the variation of dielectric constant in sensing materials depending on humidity, as described in Eq. (1). The SiO2/Si sensing material with a porous structure has high surface area to contact with water molecules. In dry conditions, the porous SiO2 media filled with air have a low dielectric constant. As humidity increased, water vapors were adsorbed on the surface of the porous SiO2. The water layers with liquid phase on the surface of SiO2 were formed by capillary condensation in the porous structure. The adsorbed water layers in the humid conditions increase the dielectric constant of the porous SiO2/Si structure24,25,26. The varied dielectric constants depending on humidity can change total capacitance of the porous SiO2/Si sensing material. Therefore, the measured capacitance of the porous SiO2/Si humidity sensor can be effectively changed by the variation of the dielectric constant of air to water depending on humid levels.

To prove the humidity sensing mechanism of porous SiO2/Si humidity sensor, the humidity sensing behavior of the porous SiO2/Si film at various RH levels of 1.8%, 53.4%, and 84.5% was investigated with Nyquist plots utilizing EIS analysis, as shown in Fig. 6d. The frequency varied from 1 kHz to 1 MHz with a testing voltage of 2 V. The semicircles were observed in the complex impedance plots regardless of the controlled RH levels. The unaffected semicircular shapes imply similar sensing behaviors of the porous SiO2/Si film on the various RH levels. The semicircles represent the behavior for the intrinsic impedance of the porous SiO2/Si film, indicating an equivalent circuit of R (CR), as described in the inset of Fig. 6d. The impedance spectra of the fabricated porous SiO2/Si film didn’t show the inclined lines representing a Warburg impedance due to the ion diffusion, even at high RH. Therefore, the sensing behavior of the porous SiO2/Si film in the RH range of 1.8% to 84.5% is dominantly determined by the hopping transfer of protons between adjacent hydroxyl groups in the chemisorbed water molecular layer20,21,23. With the increase in RH levels, the resistance, Rct, of the porous SiO2/Si film decreases, and the capacitance, CSiO2, gradually increases, displaying the decrease in the radius and curvature of the semicircle. The sensing behavior from the intrinsic impedance of the bulk SiO2/Si film at even high RH might be attributed to the highly porous and rough surface structure of SiO2. In contrast with the enhanced sensing properties in the porous SiO2/Si film, a SiO2 layer formed on a bare Si wafer shows no sensing response to the tailored RH, as shown in Fig. S4.

The reliability of the bendable porous SiO2/Si film for a capacitive humidity sensing material was investigated, as shown in Fig. 7. The reproducibility for the capacitive humidity sensing properties of the porous SiO2/Si films was tested with the sensing of 10 cycles at the frequency of 100 kHz for the RH of 71.4%. The repeated specific sensing signals displayed a reproducible sensitivity with a standard deviation of 0.048. Additionally, the humidity sensing signals at the frequency of 100 kHz for a RH of 53.4% for 15 weeks demonstrate the stable sensing performance for the long-term test. Table S1 in supporting information show a comparison of humidity sensing characteristics of recently reported humidity sensors7,8,27,28,29,30,31,32,33,34,35. The enhanced sensing properties were described in the fabricated porous SiO2/Si structure, especially as a flexible capacitive sensor.

(a) The repeated humidity sensing test of 10 cycles at a frequency of 100 kHz for 71.4% RH, and (b) long-term stability test of the capacitance as a function of time for humidity sensing at the frequency of 100 kHz for 53.4% RH.

A freestanding bendable SiO2/Si film without polymer substrates was fabricated for a capacitive humidity sensing material. The flexible Si film was prepared by a simple electrochemical-assisted stripping process that was a non-vacuum and low-temperature process. The thickness of the exfoliated single crystalline Si film was controlled by the applied current density. The porous structure on the surface of the flexible Si film was formed to enhance the humidity sensing properties by the Ag-assisted chemical etching process. Finally, the freestanding bendable porous SiO2/Si film was obtained by the oxidation of the surface of the porous Si film. The remarkable humidity sensing performance of the fabricated porous SiO2/Si film was observed with varied frequencies over a wide range from 13.8% RH to 79.0% RH. The capacitance of the porous SiO2/Si sensing materials was proportional to the reciprocal of the angular frequency and the RH. The response time and recovery time of humidity sensing for a RH of 71.4% at 100 kHz were 18 s and 30 s, respectively. The hysteresis error between the adsorption and desorption of water molecules indicated 5.0% for a 50.1% RH. The EIS analysis showed that the humidity sensing behavior of the porous SiO2/Si film might be dominantly attributed to the hopping transfer of protons in the chemisorbed water molecules. Additionally, the stable sensing behavior in the cyclic and long-term tests was confirmed. Consequently, a highly efficient and stable sensing performance for a wide RH range was demonstrated with the freestanding bendable porous SiO2/Si film. The fabricated porous SiO2/Si and Si film have attractive properties such as highly textured surfaces enabling lowering of reflectance, the porosity of layer, high surface area, and especially flexibility. The freestanding bendable SiO2/Si and Si can be widely utilized in various applications, such as energy storage, solar cell, and biosensors.

The flexible Si thin film was prepared by an electrochemical-assisted stripping process. The titanium layer of 50 nm thickness and nickel layer of 200 nm thickness on a p-type (1 0 0) silicon wafer as seed layers were deposited by an e-beam evaporator. For the stripping of the Si layer, the Ni layer was galvanostatically electrodeposited with a controlled current density of 10, 30, and 50 mAcm−2 in an electrolyte consisting of 1 M NiCl2 and 0.1 M Na3C6H5O7 in a pH 4.0 HCl solution. The electrochemical bath was maintained at 40 °C and agitated at 200 rpm. The Ni residues on the exfoliated Si film were removed in the Ni etching solution. The porous surface of the prepared flexible Si film was fabricated by the Ag-assisted chemical etching process. Ag nanoparticles as a catalyst for the etching on the flexible Si film were deposited by dipping for 2 min in a 0.02 M SnCl2 solution, followed by dipping for 30 min in a 0.02 M AgNO3 solution. The porous surface of the Si film was formed by etching for 6 h in a 5 M HF and 4 M H2O2 solution. Finally, the bendable porous SiO2/Si film was obtained by the oxidation for 6 h at 1000 °C in air. Au/Ti electrodes on both sides of the fabricated SiO2/Si film were deposited by an e-beam evaporator to measure the humidity sensing properties. To characterize the humidity sensing properties, Cu wires were connected with Au electrodes, deposited on the top and bottom sides of the fabricated SiO2/Si film.

The morphologies and microstructures of the materials were characterized by a field emission scanning electron microscope (FE-SEM, MIRA3, Tescan Co.) and transmission electron microscope (TEM, JEM-2100F, JEOL). A LCR meter (E4980A, Keysight), a humidity source (Duran SL. BOT2084), mass flow controller, and a commercial hygrometer were utilized to analyze the sensing properties. Nyquist plots were measured by EIS with a potentiostat (AMETEK, VersaStat3).

All data generated or analysed during this study are included in this published article (and its Supplementary Information files).

Wang, X., Gu, Y., Xiong, Z., Cui, Z. & Zhang, T. Silk-molded flexible, ultrasensitive, and highly stable electronic skin for monitoring human physiological signals. Adv. Mater. 26, 1336–1342 (2014).

Article  ADS  CAS  Google Scholar 

Hammock, M. L., Chortos, A., Tee, B. C. K., Tok, J. B. H. & Bao, Z. 25th anniversary article: The evolution of electronic skin (e-skin): A brief history, design considerations, and recent progress. Adv. Mater. 25, 5997–6038 (2013).

Xu, K., Lu, Y. & Takei, K. Multifunctional skin-inspired flexible sensor systems for wearable electronics. Adv. Mater. Technol. 4, 1800628 (2019).

Guo, H. et al. Transparent, flexible, and stretchable WS 2 based humidity sensors for electronic skin. Nanoscale 9, 6246–6253 (2017).

Yao, S. et al. A wearable hydration sensor with conformal nanowire electrodes. Adv. Healthcare Mater. 6, 1601159 (2017).

Aziz, S. et al. Fabrication of ZnSnO3 based humidity sensor onto arbitrary substrates by micro–nano scale transfer printing. Sens. Actuators A 246, 1–8 (2016).

Su, P.-G. & Wang, C.-S. Novel flexible resistive-type humidity sensor. Sens. Actuators B Chem. 123, 1071–1076 (2007).

Reddy, A. et al. Fully printed flexible humidity sensor. Procedia Eng. 25, 120–123 (2011).

Kano, S., Kim, K. & Fujii, M. Fast-response and flexible nanocrystal-based humidity sensor for monitoring human respiration and water evaporation on skin. ACS Sens. 2, 828–833 (2017).

Li, B. et al. A flexible humidity sensor based on silk fabrics for human respiration monitoring. J. Mater. Chem. C 6, 4549–4554 (2018).

Martínez-Estrada, M., Moradi, B., Fernández-Garcia, R. & Gil, I. Impact of conductive yarns on an embroidery textile moisture sensor. Sensors 19, 1004 (2019).

Xie, R. et al. Wearable leather-based electronics for respiration monitoring. ACS Appl. Bio Mater. 2, 1427–1431 (2019).

Zhao, H. et al. Drawn on paper: A reproducible humidity sensitive device by handwriting. ACS Appl. Mater. Interfaces 9, 28002–28009 (2017).

Feng, X., Chen, W. & Yan, L. Free-standing dried foam films of graphene oxide for humidity sensing. Sens. Actuators B Chem. 215, 316–322 (2015).

Jing, Q. et al. Freestanding functional structures by aerosol-jet printing for stretchable electronics and sensing applications. Adv. Mater. Technol. 4, 1900048 (2019).

Kwon, Y. et al. Spalling of a thin Si layer by electrodeposit-assisted stripping. Appl. Phys. Express 6, 116502 (2013).

Yang, C. et al. Spalling of thin Si layer via electroless and electrodeposit-assisted stripping (E2AS) with all-wet process for fabrication of low-cost flexible single-crystalline Si solar cell. J. Electrochem. Soc. 165, D243 (2018).

Huang, Z., Geyer, N., Werner, P., de Boor, J. & Gösele, U. Metal-assisted chemical etching of silicon: A review. Adv. Mater. 23, 285–308. https://doi.org/10.1002/adma.201001784 (2011).

Article  CAS  PubMed  Google Scholar 

Wei, X. & Roper, D. K. Tin sensitization for electroless plating review. J. Electrochem. Soc. 161, D235 (2014).

Bi, H. et al. Ultrahigh humidity sensitivity of graphene oxide. Sci. Rep. 3, 1–7 (2013).

Wang, W. et al. Humidity sensor based on LiCl-doped ZnO electrospun nanofibers. Sens. Actuators B Chem. 141, 404–409 (2009).

Tomer, V. K., Thangaraj, N., Gahlot, S. & Kailasam, K. Cubic mesoporous Ag@ CN: A high performance humidity sensor. Nanoscale 8, 19794–19803 (2016).

Zhang, D., Cao, Y., Li, P., Wu, J. & Zong, X. Humidity-sensing performance of layer-by-layer self-assembled tungsten disulfide/tin dioxide nanocomposite. Sens. Actuators B Chem. 265, 529–538 (2018).

Hughes, J. V. & Armstrong, H. L. The dielectric constant of dry air. J. Appl. Phys. 23, 501–504. https://doi.org/10.1063/1.1702240 (1952).

Article  ADS  CAS  Google Scholar 

Uematsu, M. & Frank, E. U. Static dielectric constant of water and steam. J. Phys. Chem. Ref. Data 9, 1291–1306. https://doi.org/10.1063/1.555632 (1980).

Article  ADS  CAS  Google Scholar 

Palmer, L. S., Cunliffe, A. & Hough, J. M. Dielectric constant of water films. Nature 170, 796–796. https://doi.org/10.1038/170796a0 (1952).

Article  ADS  CAS  Google Scholar 

Hassan, G., Sajid, M. & Choi, C. Highly sensitive and full range detectable humidity sensor using PEDOT:PSS, methyl red and graphene oxide materials. Sci. Rep. 9, 15227. https://doi.org/10.1038/s41598-019-51712-w (2019).

Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

Gupta, S. P., Pawbake, A. S., Sathe, B. R., Late, D. J. & Walke, P. S. Superior humidity sensor and photodetector of mesoporous ZnO nanosheets at room temperature. Sens. Actuators B Chem. 293, 83–92. https://doi.org/10.1016/j.snb.2019.04.086 (2019).

Li, S. et al. Flexible highly-sensitive humidity sensor based on CGO/SMPLAF for wearable human skin humidity detection. Sens. Actuators B Chem. 362, 131806. https://doi.org/10.1016/j.snb.2022.131806 (2022).

Duan, Z. et al. Daily writing carbon ink: Novel application on humidity sensor with wide detection range, low detection limit and high detection resolution. Sens. Actuators B Chem. 339, 129884. https://doi.org/10.1016/j.snb.2021.129884 (2021).

Qiang, T. et al. High-Performance porous MIM-type capacitive humidity sensor realized via inductive coupled plasma and reactive-Ion etching. Sens. Actuators B Chem. 258, 704–714. https://doi.org/10.1016/j.snb.2017.11.060 (2018).

Dwiputra, M. A., Fadhila, F., Imawan, C. & Fauzia, V. The enhanced performance of capacitive-type humidity sensors based on ZnO nanorods/WS2 nanosheets heterostructure. Sens. Actuators B Chem. 310, 127810. https://doi.org/10.1016/j.snb.2020.127810 (2020).

Niu, H. et al. Ultrafast-response/recovery capacitive humidity sensor based on arc-shaped hollow structure with nanocone arrays for human physiological signals monitoring. Sens. Actuators B Chem. 334, 129637. https://doi.org/10.1016/j.snb.2021.129637 (2021).

Qi, R. et al. Capacitive humidity sensors based on mesoporous silica and poly(3,4-ethylenedioxythiophene) composites. J. Colloid Interface Sci. 565, 592–600. https://doi.org/10.1016/j.jcis.2020.01.062 (2020).

Article  ADS  CAS  PubMed  Google Scholar 

Alrammouz, R. et al. Highly porous and flexible capacitive humidity sensor based on self-assembled graphene oxide sheets on a paper substrate. Sens. Actuators B Chem. 298, 126892. https://doi.org/10.1016/j.snb.2019.126892 (2019).

This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning (No. 2015R1A5A1037548) and by the National Research Foundation of Korea (NRF) (No. NRF-2020R1A2C2009462). This research was also supported by the Technology Innovation Program (20017189, Development of non-cyanide gold bump solution and plating process for the semiconductor device bonding process) funded By the Ministry of Trade, Industry & Energy (MOTIE, Korea).

Department of Materials Science and Chemical Engineering, Hanyang University, Ansan, 15588, Republic of Korea

Soobin Park, Jinmyeong Seo, Jungjoon Park, Inseong Hwang & Bongyoung Yoo

Department of Architectural Engineering, Hanyang University, Ansan, 15588, Republic of Korea

Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering & Technology, 101 Soho-ro, Jinju, 52851, Republic of Korea

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

B.Y. conceived of the presented idea. S.P., J.S., J.P., I.H. and H.L. synthesis the sensor materials and prepared the setup of experiments. S.P., H.J. and B.Y. suggested the mechanism and wrote the main manuscript and prepared figures. All authors discussed the results and contributed to the final manuscript.

Correspondence to Hyunsung Jung or Bongyoung Yoo.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Park, S., Seo, J., Park, J. et al. Capacitive humidity sensing properties of freestanding bendable porous SiO2/Si thin films. Sci Rep 12, 11689 (2022). https://doi.org/10.1038/s41598-022-15955-4

DOI: https://doi.org/10.1038/s41598-022-15955-4

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Scientific Reports (Sci Rep) ISSN 2045-2322 (online)

Capacitive humidity sensing properties of freestanding bendable porous SiO2/Si thin films | Scientific Reports

Biodegradable Pet Waste Bags Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.